|
|
|
|
MISCELLANEOUS HARDWARE &
ACCESSORIES
|
 |
Standard and Optional Mounting
Hardware and Accessories |
|
A wide variety of standard and optional
hardware, caps and switch guards are
available for miniature and industrial
toggles and pushbuttons. Choices include
panel dress nuts, color caps and face
plates, identified by series type. |
|
 
|
|
|
SEALING BOOTS |
|
|
 |
Sealing Boots |
|
A broad range of neoprene and silicone sealing boots are offered for miniature and industrial toggle switches. Both full-toggle and half-toggle versions are available in a variety of colours. A sealing ring or washer is supplied standard with each boot. |
|
 |
|
|
 |
Toggle Switch Sealing Boots |
APEM introduces 2 new neoprene switch sealing boots. These boots feature a soft feel for easy gripping and environmental protection to IP67.
These products are available in 2 sizes. The smaller version, part number
U2252, can be mounted on the standard levers of
12000,
3500,
3600 and 600
toggle switches, while the larger one, part number U2197, is intended for
the X2243 long lever of the 3600 and
600 series. |
 |
|
|
SECURITY CAPS |
|
|
 |
Security Caps |
Protection provided against inadvertent
lever operation for 2 or 3 position
switches. Designed for use on 11.9 (.468)
or 12mm (.472) threaded bushing and lever
length 17.5mm (.688) outside bushing.
Available in most colors and
black/yellow stripes.
|
|
|
|
 |
15A and 25A Terminal Posts |
|
Insulated and non-insulated terminal
posts, available in 8 colours Operating
temperature of -40 to +70 degrees C |
|
 |
|
|
LED INDICATORS |
|
 |
|
|
Professional LED indicators |
|
Indicators with red, yellow, or green
built-in LED available in 6mm (.236) and
8mm (.314) bushing diameters. Available
sealed or unsealed with bright or black
chrome finish. Standard mounting
hardware supplied with all models. |
|
|
|
 |
Panel Mount LED indicators |
|
APEM’s Q-Series indicators are offered in red, green, yellow, blue and white, and are available with optional bicolour, tricolour and flashing LED’s. Available in 6mm, 8mm and 14mm packages, with bright chrome, black chrome and satin grey finishes. Integral resistors allow for direct connection to 12VDC, 12VAC/DC, 24VDC, 24VAC/DC, 110VAC and 220VAC. |
| |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Apem Components Ltd
Drakes Drive, Long Crendon
Buckinghamshire
HP18 9BA. U.K
Tel +44 (0)1844 202400 Fax +44 (0)1844 202500
Registered in
England No 1730676 Registered address as above |
|
| |
